services

streetrepair3.jpg

Infrared Asphalt Repair

INFRARED ASPHALT REPAIR

Infrared asphalt repairs produce permanent repairs while keeping costs reasonable and environmental impact low.

  • Repairs completed in a fraction of the time of conventional methods means minimum disruption to traffic.
  • Environmentally friendly process recycles approximately 85% of existing asphalt, reduces waste material headed for the land fill & requires less new asphalt.
  • Infrared repairs are superior to other conventional repair methods.
  • Substantial cost savings helping you stay within your budget.
  • All joints are seamless, making it impossible for moisture to penetrate the surface. The finished repair isn't just a patch, it's literally welded to the surrounding asphalt.
BEFORE

BEFORE

AFTER

AFTER

SURFACE PATCHING

Surface patching is a very economical way to repair pavement defects. A tack coat is sprayed over the existing area, then new hot mix asphalt is spread over the area. The new asphalt is then feathered into the surrounding area to make the transition as smooth as possible. The asphalt is then compacted and ready for use.

 

ALL SEASON POT HOLE REPAIR

New technologies in asphalt production have produced outstanding performance and durability. Built in flexibility resists cracking and reduced temperatures needed to manufacture and work with make it environmentally friendly. With less heat needed, our warm mix asphalt can be used year round to produce asphalt repairs. 

 

REPAIRS WE'VE COMPLETED

  • Rough Surfaces
  • Speed Bumps Built
  • Utility Cuts
  • Handicapped Ramps
  • Bird Bath SunkenAreas
  • Trip Hazards
  • Pot Holes
  • Alligator cracking
  • Man Holes
  • Trench Repairs
  • Bumps & High Spots
  • Cracks
  • Oil Spots

INFRARED Step By Step Process

STEP ONE:

The infrared unit is placed over the damaged area for approximately 10-14 minutes. The unit heats through the existing asphalt depth, enabling base re-compaction.

STEP THREE:

New asphalt is added to the area to match the surrounding asphalt. By using same day made hot mix asphalt product, the new area will outlast the surrounding asphalt.

Overlay_-_Compacting_Asphalt_copy.jpg

STEP TWO:

Of the compromised asphalt, usually 15%-20% is removed. The remaining asphalt is luted, smoothed and a rejuvenating agent is added.

 

 

 

STEP FOUR:

The repaired area is compacted using a vibratory roller. The repair is completed as the new asphalt is bonded to the surrounding area, resulting in a permanent repair.

Hot Rubberized Crack Sealing

YOUR FIRST DEFENSE IN EXTENDING THE LIFE OF YOUR PAVEMENT

Crack sealing is your first defense in prolonging the life of your asphalt. Proper crack sealing prevents water from entering the base and delays future expensive replacement.

Regular sealing of cracks as they appear can double the life of your pavement. We operate the highest production equipment available. Along with our experienced crew we are your choice from parking lots to large roadway projects across western Canada.


THE PROCESS

All cracks are throughly cleaned using high pressure air heated to 2000 degrees fahrenheit, creating a clean reservoir for the sealant to bond to. Cracks are then filled to full depth using a commercial grade hot rubberized product. The rubber is applied at 350 degrees and pumped deep into the crack. Then a bander is used to create a 3-4 inch band across the top of the crack. Using this flexible product is a must in our climate, it will remain flexible, expanding and contracting during freeze/thaw cycles. Dollar for dollar sealing cracks is the most effective way to preserve you pavement.

Asphalt Seal Coating

SpraySeal_1.jpg

Asphalt sealcoating is one of the essential elements of maintaining your commercial or residential asphalt.

Sealcoating is used on pavement surfaces to protect against gasoline, oil, salt, ultraviolet rays and slows oxidation and water penetration.

Asphalt sealcoating adds great presence to your premises by providing a smooth black finish leaving a professional, refreshed look.

THE PROCESS

Your asphalt surface is gone over thoroughly and we explain the best options to protect your parking lot or driveway. We clean the entire surface to insure proper adhesion and a long lasting seal is achieved. In some cases where a parking lot is dirty enough we will suggest a pass with a sweep truck prior to our work starting. All edging is done by hand to insure no overspray on sidewalks and landscaping and the remaining surface is spray applied. After curing the asphalt is opened up to traffic and business as usual.  

    BENEFITS

    • Extends the life of asphalt surfaces
    • Protects from the damaging effects of water, gasoline, oil, salt and chemicals
    • Increase the value and appeal of your property
    • Snow will melt faster off a freshly sealcoated driveway
    • Provides a protective layer on your asphalt, saving money in the longrun
    • We can work around your business needs, sealing your lot in stages to keep areas open for customers.

    Line Marking & Parking Lot Products

    PROFESSIONAL LINE MARKING

    Freshly painted parking areas not only improve the appearance of your property but aids in the safety of your clients. We have many years experience in repaints and new layouts. We have local parking lots that we have been painting for over 20 years. We use highway grade traffic paint on all projects, never cutback or compromised. 

    Our modern airless spray equipment is designed with the latest technology that assures proper application rates. We have many stencils & symbols and custom stencils are available upon request. Your parking area will be worked on according to your schedule to minimize any disruption to traffic and your clients.

    RECYCLED RUBBER WHEEL STOPS

    Broken and out of place concrete wheel stops are a danger to vehicles and pedestrians alike. The latest technology in wheel stops are manufactured using recycled tires. They come with reflective markings and never need painting.

    THERMOPLASTIC POST SLEEVES

    Tired of ugly scratched and faded parking posts? Our thermoplastic post sleeves are the answer. These post sleeves will never need scraping and painting again.  They are maintenance free. Various sizes are available, even for larger light post bases.